REDOX CONTROLLER CR-421
CR-421 is a simple and accurate stationary device used for continuous redox and temperature measurements in clean water or sewage.
Depending on working conditions, the appropriate type of redox electrode may be chosen and built-in the flow through or immersible head.
The controller is available in three versions:
1. Equipped with two relays to control valves and signalisation system.
2. Equipped with 0 ÷ 20 mA or 4 ÷ 20 mA current loop.
3. Equipped with RS-232 output with a software to collect the data on a PC.
Optionally, the connection may be made by USB with use of RS-232 / USB converter (additional equipment).
TECHNICAL DATA
Function | Redox | Temperature |
---|---|---|
Range | ± 1999 mV | -50.0 ÷ 199.9 °C |
Resolution | 1 mV | 0.1 °C |
Accuracy (±1 digit) | ±1 mV* | ±0.1 °C** |
Input immpedance | >1012Ω | - |
Relay's parameters | 2A/250VAC/30VDC | |
Radio electric interference | N level | |
Power supply | 12 V / 100 mA power adapter | |
Weight | 210 g | |
Dimensions (mm) | L = 149, W = 82, H = 22 |
* | The accuracy of the meter only. |
** | The accuracy of the meter only. The total error includes the meters and probe’s accuracy. In the range 0 ÷ 100 °C the acceptable error of the probe with Pt-1000B resistor: ±0.8 °C, with Pt-1000A resistor: ±0.35 °C. |